? ultra low esr < 30 m ? new e/7260 case with esr < 18 m ? up to 5 amps ripple current ? rohs compliant & leadfree termination (see www. kemet.com for lead transitions) ? operating temperature: -55?c to +125?c ? 100% accelerated steady-state aging ? 100% surge current test ? precision - molded, laser-marked case ? symmetrical compliant terminations ? taped and reeled per eia 481-1 features
outline drawing dimensions - millimeters (inches) notes: metric dimensions govern (ref) - dimensions provided for reference only. 2.3 (.091) k 0.20 (.008) 0.10 0.10 (.004 .004) kemet eia lwh x (ref) p (ref) r (ref) t (ref) a (min) g (ref) e (ref) x 7343-43 7.3 0.3 (.287 .012) 4.3 0.3 (.169 .012) 4.0 0.3 (.157 .012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) case size component s 0.3 (.012) f 0.1 (.004) b (ref) 0.15 (.006) e 7260-38 7.3 0.3 (.287 .012) 6.0 0.3 (.236 .012) 3.6 0.2 (.142 .008) 2.3 (.091) 4.1 (.161 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) ?kemet electronics corporation, p.o. box 5928, greenville, s.c. 29606, (864) 963-6300 solid tantalum chip capacitors t510 serieshigh capacitance-low esr (1) to complete kemet part number insert "k" - 10% or "m" - 20% capacitance tolerance. (2) to complete kemet part number, ins ert h (snpb) or t 100% tin. *part number example: t510x477m006at (14 digits - no spaces). see www.kemet.com for pb free transition. ** ?s? termination codes are converting from 90 sn/10 pb to 100% tin finishes. orders including ?s? suffix termination codes do not quarantee pb-free product. t510 ratings & part number reference t510 ordering information 25c 85c 125c 680.0 x t510x687(1)004a(2)e030 27.2 6.0 30.0 3.0 2.7 1.2 1000.0 x t510x108(1)004a(2)e018 40.0 6.0 18.0 3.9 3.5 1.5 1000.0 e t510e108(1)004a(2)e018 40.0 6.0 18.0 4.0 3.6 1.6 1000.0 e t510e108(1)004a(2)e010 40.0 6.0 10.0 5.3 4.8 2.1 470.0 x t510x477(1)006a(2)e030 28.2 6.0 30.0 3.0 2.7 1.2 680.0 e t510e687(1)006a(2)e023 40.8 6.0 23.0 3.5 3.2 1.4 680.0 e t510e687(1)006a(2)e012 40.8 6.0 12.0 4.8 4.3 1.9 330.0 x t510x337(1)010a(2)e035 33.0 6.0 35.0 2.8 2.5 1.1 150.0 x t510x157(1)016a(2)e040 24.0 6.0 40.0 2.6 2.3 1.0 220.0 x t510x227(1)016a(2)e040 35.2 10.0 40.0 2.6 2.3 1.0 220.0 x t510x227(1)016a(2)e025 35.2 10.0 25.0 3.3 3.0 1.3 100.0 x t510x107(1)020a(2)e040 20.0 6.0 40.0 2.6 2.3 1.0 100.0 e t510e107(1)025a(2)e050 25.0 8.0 50.0 2.4 2.1 1.0 22.0 x t510x226(1)035a(2)e080 7.7 6.0 80.0 1.8 1.7 0.7 33.0 x t510x336(1)035a(2)e065 11.6 6.0 65.0 2.0 1.8 0.8 33.0 x t510x336(1)035a(2)e050 11.6 6.0 50.0 2.3 2.1 0.9 47.0 x t510x476(1)035a(2)e055 16.5 8.0 55.0 2.2 2.0 0.9 47.0 e t510e476(1)035a(2)e050 16.5 8.0 50.0 2.4 2.1 1.0 10.0 x t510x106(1)050a(2)e120 5.0 8.0 120.0 1.5 1.3 0.6 10.0 x t510x106(1)050a(2)e090 5.0 8.0 90.0 1.7 1.6 0.7 capaci- tance f case size 25 volt rating at +85c (17 volt rating at 125c) dc leakage a @ 25c max df % @ 25c max esr m : @ 25c 100 khz max ripple current a rms @ 25c 100 khz, max kemet part number 50 volt rating at +85c (33 volt rating at 125c) 35 volt rating at +85c (23 volt rating at 125c) 4 volt rating at +85c (2.7 volt rating at 125c) 6/6.3 volt rating at +85c (4 volt rating at 125c) 10 volt rating at +85c (7 volt rating at 125c) 16 volt rating at +85c (11 volt rating at 125c) 20 volt rating at +85c (13.4 volt rating at 125c) capacitance tolerance m = 20%, k = 10% series t510 - high capacitance, low esr lead material t = 100% tin (sn) plated h = (sn) solder-coated (90% sn/10% pb) g = gold plated s = not recommended for new design case size e, x capacitance picofarad code first two digits represent significant figures. third digit specifies number of zeros to follow. tantalum t 510 x 477 m 006 a t esr e030 = esr in milliohmns = 30 mohms failure rate a = not applicable 41 solid tantalum surface mount 030 25c 85c 125c 680.0 x t510x687(1)004a(2)e030 27.2 6.0 30 3.0 2.7 1.2 1000.0 x t510x108(1)004a(2)e018 40.0 6.0 18 3.9 3.5 1.5 1000.0 x t510x108(1)004a(2)e023 40.0 6.0 23 3.4 3.0 1.3 1000.0 e t510e108(1)004a(2)e018 40.0 6.0 18 4.0 3.6 1.6 1000.0 e t510e108(1)004a(2)e010 40.0 6.0 10 5.3 4.8 2.1 470.0 x t510x477(1)006a(2)e030 28.2 6.0 30 3.0 2.7 1.2 680.0 x t510x687(1)006a(2)e023 42.8 6.0 23 3.4 3.1 1.4 680.0 e t510e687(1)006a(2)e023 40.8 6.0 23 3.5 3.2 1.4 680.0 e t510e687(1)006a(2)e012 40.8 6.0 12 4.8 4.3 1.9 330.0 x t510x337(1)010a(2)e035 33.0 6.0 35 2.8 2.5 1.1 150.0 x t510x157(1)016a(2)e030 24.0 6.0 30 3.0 2.7 1.2 150.0 x t510x157(1)016a(2)e040 24.0 6.0 40 2.6 2.3 1.0 220.0 x t510x227(1)016a(2)e040 35.2 10.0 40 2.6 2.3 1.0 220.0 x t510x227(1)016a(2)e025 35.2 10.0 25 3.3 3.0 1.3 cap f case size 4 volt rating at +85c (2.7 volt rating at 125c) 6/6.3 volt rating at +85c (4 volt rating at 125c) 10 volt rating at +85c (7 volt rating at 125c) 16 volt rating at +85c (11 volt rating at 125c) dc leakage a @ +25c max df % @ +25c 120hz max esr m @ +25c 100 khz max ripple current arms @ +25c, 100 khz, max kemet part number 25c 85c 125c 100.0 x t510x107(1)020a(2)e035 20.0 8.0 35.0 7.7 6.9 3.1 100.0 x t510x107(1)020a(2)e040 20.0 6.0 40.0 2.6 2.3 1.0 100.0 x t510x107(1)020a(2)e045 20.0 6.0 45.0 2.4 2.2 0.9 100.0 e t510e107(1)025a(2)e050 25.0 8.0 50 2.4 2.1 1.0 22.0 x t510x226(1)035a(2)e100 7.7 6.0 100 1.6 1.4 0.6 22.0 x t510x226(1)035a(2)e080 7.7 6.0 80 1.8 1.7 0.7 22.0 x t510x226(1)035a(2)e060 7.7 6.0 60 2.1 1.9 0.8 33.0 x t510x336(1)035a(2)e065 11.6 6.0 65 2.0 1.8 0.8 33.0 x t510x336(1)035a(2)e050 11.6 6.0 50 2.3 2.1 0.9 47.0 x t510x476(1)035a(2)e055 16.5 8.0 55 2.2 2.0 0.9 47.0 x t510x476(1)035a(2)e065 16.5 8.0 65 2.0 1.8 0.8 47.0 e t510e476(1)035a(2)e050 16.5 8.0 50 2.4 2.1 1.0 10.0 x t510x106(1)050a(2)e120 5.0 8.0 120 1.5 1.3 0.6 10.0 x t510x106(1)050a(2)e090 5.0 8.0 90 1.7 1.6 0.7 case size kemet part number 50 volt rating at +85c (33 volt rating at 125c) 35 volt rating at +85c (23 volt rating at 125c) 20 volt rating at +85c (13.4 volt rating at 125c) cap f 25 volt rating at +85c (17 volt rating at 125c) dc leakage a @ +25c max df % @ +25c 120hz max esr m @ +25c 100 khz max ripple current arms @ +25c, 100 khz, max (1) to complete kemet part number insert "k" - 10% or "m" - 20% capacitance tolerance. (2) to complete kemet part number, insert h (snpb) or t - 100% tin. 25c 85c 125c 680.0 x t510x687(1)004a(2)e030 27.2 6.0 30 3.0 2.7 1.2 1000.0 x t510x108(1)004a(2)e018 40.0 6.0 18 3.9 3.5 1.5 1000.0 x t510x108(1)004a(2)e023 40.0 6.0 23 3.4 3.0 1.3 1000.0 e t510e108(1)004a(2)e018 40.0 6.0 18 4.0 3.6 1.6 1000.0 e t510e108(1)004a(2)e010 40.0 6.0 10 5.3 4.8 2.1 470.0 x t510x477(1)006a(2)e030 28.2 6.0 30 3.0 2.7 1.2 680.0 x t510x687(1)006a(2)e023 42.8 6.0 23 3.4 3.1 1.4 680.0 e t510e687(1)006a(2)e023 40.8 6.0 23 3.5 3.2 1.4 680.0 e t510e687(1)006a(2)e012 40.8 6.0 12 4.8 4.3 1.9 330.0 x t510x337(1)010a(2)e035 33.0 6.0 35 2.8 2.5 1.1 150.0 x t510x157(1)016a(2)e030 24.0 6.0 30 3.0 2.7 1.2 150.0 x t510x157(1)016a(2)e040 24.0 6.0 40 2.6 2.3 1.0 220.0 x t510x227(1)016a(2)e040 35.2 10.0 40 2.6 2.3 1.0 220.0 x t510x227(1)016a(2)e025 35.2 10.0 25 3.3 3.0 1.3 dc leakage a @ +25c max df % @ +25c 120hz max esr m @ +25c 100 khz max ripple current arms @ +25c, 100 khz, max 4 volt rating at +85c (2.7 volt rating at 125c) 6/6.3 volt rating at +85c (4 volt rating at 125c) 10 volt rating at +85c (7 volt rating at 125c) 16 volt rating at +85c (11 volt rating at 125c) cap f case size kemet part number *pb-free supply is not guaranteed with the ?s? termination code. this termination code not available effective 15 july 2007. voltage
?kemet electronics corporation, p.o. box 5928, greenville, s.c. 29606, (864) 963-6300 solid tantalum chip capacitors t510 serieshigh capacitance typical cap frequency scan @ 25 c t510e108m004as typical esr/z frequency scan @ 25 c t510e108m004as capacitance ( f) 100hz 1khz 10khz 100khz 1mhz 500 600 700 800 900 1000 1100 1200 1300 1400 1500 100hz 1khz 10khz 100khz 1mhz .01 esr ( ) z ( ) ( ) .1 1 10 100hz 1khz 10khz 100khz 1mhz .01 esr ( ) z ( ) ( ) .1 1 10 0 50 100 150 200 250 300 350 400 450 500 capacitance ( f) 100hz 1khz 10khz 100khz 1mhz typical esr/z frequency scan @25?c t510x477m006as typical cap frequency scan @25?c t510x477m006as t510 capacitor markings 477 6 k 514 m+ ultra-low esr device picofarad code kemet i. d. symbol rated voltage 1st digit =year 2nd & 3rd digits = week polarity indicator (+) (solid stripe) 514 = the 14th week of 2005. 42 477 6v polarity indicator (+) lot code picofarad code k voltage date code v5 49 date code month 1 = jan 7 = jul 2 = feb 8= aug 3 = mar 9 = sep 4 = apr 10 = oct 5 = may 11 = nov 6 = jun 12 = dec date code year s = 2004 t = 2005 u = 2006 v = 2007 w = 2008 x = 2009 m+ kemet organic capacitor alternate markings
?kemet electronics corporation, p.o. box 5928, greenville, s.c. 29606, (864) 963-6300 tape & reel packaging kemets molded tantalum and aluminum chip capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with eia standard 481-1: taping of surface mount components for automatic handling. this packaging system is compatible with all tape fed automatic pick and place systems. right hand orientation only (+) (C) embossed carrier embossment top tape thickness .10mm (.004") max thickness 8mm .30 (.315 .012") or 12mm .30 (.472 .012") 178mm (7.00") or 330mm (13.00") 8mm (0.315") or 12mm (0.472") 180mm (7.0") or 330mm (13.0") quantities packaged per reel case code tape kemet eia width-mm 7" reel* 13" reel* r 2012-12 8 2,500 10,000 s 3216-12 8 2,500 10,000 t 3528-12 8 2,500 10,000 u 6032-15 12 1,000 5,000 w 7343-15 12 1,000 3,000 v 7343-20 12 1,000 3,000 a 3216-18 8 2,000 9,000 b 3528-21 8 2,000 8,000 c 6032-28 12 500 3,000 d 7343-31 12 500 2,500 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 e 7260-38 12 500 2,000 * no c-spec required for 7" reel packaging. c-7280 required for 13" reel packaging. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia-556. tantalum and aluminum chip capacitors packaging information packaging * standard reel packaging is not mandatory . * bulk packaging also available using c-7610 . 92
?kemet electronics corporation, p.o. box 5928, greenville, s.c. 29606, (864) 963-6300 performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 newton to 1.0 newton (10g to 100g) 12 mm 0.1 newton to 1.3 newton (10g to 130g) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. reel sizes: molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with c-7280). note that 13 reels are preferred. 4. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia-556. embossed carrier tape configuration: figure 1 notes 1. b1 dimension is a reference dimension for tape feeder clearance only. 2. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 3. tape with components shall pass around radius r without damage (see sketch a). the minimum trailer length (fig. 2) may require additional length to provide r min. for 12 mm embossed tape for reels with hub diameters approaching n min. (table 2) 4. the cavity defined by a 0 , b 0 , and k 0 shall be configured to surround the part with sufficient clearance such that the chip does not pro- trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mecha nical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restric ted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) table 1 embossed tape dimensions (metric will govern) constant dimensions millimeters (inches) tape size d 0 ep 0 p 2 t max t 1 max 8 mm 1.5 1.75 0.10 4.0 0.10 2.0 0.05 0.600 0.100 and +0.10 -0.0 12 mm (0.059 (0.069 0.004) (0.157 0.004) (0.079 0.002) (0.024) (0.004) +0.004, -0.0) variable dimensions millimeters (inches) tape size pitch b 1 max. d 1 min. f p 1 r min. t 2 max w a 0 b 0 k 0 note 1 note 2 note 3 note 4 8 mm single 4.4 1.0 3.5 0.05 4.0 0.10 25.0 2.5 8.0 0.30 (4 mm) (0.173) (0.039) (0.138 0.002) (0.157 0.004) (0.984) (0.098) (.315 0.012) 12 mm double 8.2 1.5 5.5 0.05 8.0 0.10 30.0 4.6 12.0 0.30 (8 mm) (0.323) (0.059) (0.217 0.002) (0.315 0.004) (1.181) (0.181) (0.472 0.012) tantalum, ceramic and aluminum chip capacitors packaging information 94
?kemet electronics corporation, p.o. box 5928, greenville, s.c. 29606, (864) 963-6300 embossed carrier tape configuration (cont.) sketch d: tape camber (top view) allowable camber to be 1 mm/250 mm. 250mm (9.843) 1mm (0.039) max. 1mm (0.039) max. table 2 C reel dimensions (metric will govern) figure 3: reel dimensions (metric dimensions will govern) tape size a max b* min c d* min n min w 1 w 2 max w 3 8 mm 330.0 1.5 13.0 0.20 20.2 50.0 8.4 14.4 7.9 min (12.992) (0.059) (0.512 0.008) (0.795) (1.969) +1.5, -0.0 (0.567) (0.311) see (0.331 10.9 max note 3 +0.059, -0.0) (0.429) 12 mm 330.0 1.5 13.0 0.20 20.2 table 1 12.4 18.4 11.9 min (12.992) (0.059) (0.512 0.008) (0.795) +2.0, -0.0 (0.724) (0.469) (0.488 15.4 max +0.078, -0.0) (0.606) tantalum, ceramic and aluminum chip capacitors packaging information figure 2: tape leader & trailer dimensions (metric dimensions will govern) 400mm (15.75) min. 20 95 packaging
|
